ZZPerformance Supercharger Pulley Puller Removal Tool, Eaton M90 M112 M62

Description

ESALES
Contact Us
Reviews
Ending Soon
Shop More
ZZPerformance Supercharger Pulley Puller Removal Tool, Eaton M90 M112 M62
Platinum Rated
99% (+) Feedback
Fast Shipping
24 Hour Departure
Description
ZZPerformance Supercharger Pulley Puller and Installer

Removes and installs Press on pulleys
Installs Press On pulleys or modular hubs.
ZZPerformance 3rd Gen Supercharger Pulley Puller:
Aluminum design is compact, lightweight, and will not rust
Large threaded rod has 15/16″ end eliminating stripped shaft ends
Center plate holds the loose nut so shaft can be turned with full range of motion.
Pulley swaps are completed in 1/2 the time.
Aluminum design is compact, lightweight, and will not rust
Large threaded rod has 15/16″ end eliminating stripped shaft ends
Center plate holds the loose nut so shaft can be turned with full range of motion.
Pulley swaps are completed in 1/2 the time
Locator pin now included along with M8 stud, this lowers chance of messing up snout threads
Fully supports pulley to eliminate chance of damaging it during removal or install
Works with all modular systems and press on pulleys of any size.
If you want to remove a modular pulley hub from your supercharger you will also need our
ZZP Modular Hub Removal Plate
.
Fully supports pulley to eliminate chance of damaging it during removal or install
Works with all modular systems and press on pulleys of any size.
The problems of the older design and other brand pulley pullers are:
Weight, it’s bulky and weighs a lot. Inconvenient to put in a normal tool box.
Slow, with the old design pulley swaps take 20-60 minutes
Risk of damaging removed pulley. Horseshoe does not support entire back of pulley
Snout damage. Threaded stud can mung up the threads in the snout
Tool damage. 1/2″ end of large threaded rod gets stripped easily
*Please note that in the center of the snout (center of pulley where the shaft is) that if you do not have a threaded hole in the shaft because someone broke off a bolt in there, you will not be able to remove the pulley*  That threaded center shaft is on the supercharger and is needed to thread an M8 stud that is included with this kit as part of the removal of the press on pulley.  We have had a couple customers say they do not have a threaded center shaft because previous owner of vehicle had a broken bolt in the shaft which prevents the ability to remove pulley with this tool.  This is not our responsibility.
This will remove the pulley on LSA and LT4 superchargers, but will not reinstall it.  You will need a press in order to reinstall onto these types of superchargers.
We specialize in Superchargers and developed this pulley puller kit to be the very best you will find.
Before we developed our tool it was a very difficult task to remove the stock pulley off of a stock supercharger.  Most people attempt it with a typical 3 jaw puller which is guaranteed to damage the snout and bend the pulley.  So we designed a real supercharger pulley pulley that removes it from the snout without destroying anything and can install the pulley back on without requiring a press.
On most cars you can even do it without removing the supercharger from the car.  After years of improvements this is the very best hands down.  Of course since we came out with this many people have copied our engineered design, but still have an inferior product.  Even though they copied our design we have a superior product with superior material.  The plates are aluminum, thick, and CNC machined right here in the U.S.  Our long threaded rod is the most durable one in the world as many inferior ones out there that other people are using cannot withstand the abuse ours can.  Others will strip after a couple times of use.  With ours as long as you use anti-seize on the threads will last a very long time.  Plus when dealing with us you don’t have to worry about not being able to find replacement parts when needed.  We are not some guy in his spare time at work making these kits to sell on ebay.  We are a business that will be here for you when you need replacements parts so you don’t have to buy a totally new kit.  After time you may lose a washer or small M8 stud or need a replacement rod, etc.  The aluminum CNC machined plates are the most expensive component to the tool kit and those will last forever.  Our kit comes with instructions on how to use.  We also offer separately a modular hub removal plate that can be used in combination with this pulley puller to remove modular hubs.  The kit as it comes can install a modular hub, but removing one requires a special backing plate which is not included.  This is must have for any mechanic.  If you ever need to replace the bearings in a snout, install a new snout seal because it leaks, replace a pulley, upgrade a pulley, etc you will need this tool and typical parts stores will not have one.
Best product and best price on the market!  This can be used on all superchargers with press on style pulleys.  Ford, Pontiac, Chevy, Holden, Buick, Mercedes, etc.
Everything is made in house in the U.S. right here in Michigan.  CNC machined plates.  That never fail.  Thick.  Compare pictures to what others are selling.  The quality is apparent.  Others just use a block of aluminum with sharp edges that are much thinner than our plates.  Which you will see will bend and warp when pulling the pulley.
Now comes with our new retail packaging!
There are NO RETURNS for used Pulley Pullers.  We do not want to run into cheap customers who want to buy this tool and use it for their project and want to return it after using it.  They are new when we ship them to you and will accept it as a return if it is unused and new, but not if it is used.
Thank you for shopping!

Look for ZZPerformance on all social platforms!
Payment
Our listings are generally “Buy It Now”, meaning payment will be due at the time of purchase.
We accept PayPal, PayPal Credit, as well as Visa, MasterCard, Discover and American Express!
Return Policy
Returns are accepted on all items EXCEPT for electronics! Please contact us within 30 days of receiving your item for a 100% return.
There will be a restocking fee of 15%.
Shipping
We can only ship to the address provided upon checkout! Most domestic (US.) orders will ship within 1-5 business days of order placement.
International orders may take 7-10 business days.
About Us
Today ZZP is located in Wyoming, MI. Occupying over 30,000 sq ft, we are the World’s Largest Supplier of
aftermarket performance parts for 3800,Sonic/cruze,Ecotec, and soon to be ATS platforms providing industry
leading customer service and support. Our staff of professionals has intimate knowledge in all the vehicle
platforms we represent and are dedicated to 100% customer satisfaction. ZZPerformance provides you with highly
specific technical information, not found anywhere else.
Contact Us
Please feel free to contact us with any questions or concerns via our contact page. Just click the “contact button” at the top of the page. If you are not signed into your eBay account you will be prompted to do so. Thank you.
ZZPerformance is the highest rated seller for aftermarket specialty items. All manufacturers names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
Copyright © 2001-2017. All rights reserved.